VoltDrop.app Feedback

Electrical calculators that explain themselves. No signup, no guessing.

📏 Max Wire Length Calculator

How far can your wire run before voltage drop becomes a problem? Get the maximum one-way distance for any wire size and load.

DC: batteries, solar, vehicles, LED strips.

volts
amps

The amps your device or circuit actually draws. If a label says watts, amps = watts ÷ volts.

AWG = American Wire Gauge. Smaller number = thicker wire. It's printed on the wire jacket.

feet

Measure one way — from the power source to the load. Electricity makes a round trip, and we double it for you. Don't double it yourself.

Why 3% and 5%?

Wire has resistance, so some voltage is lost as heat before it reaches your device. Lose too much and motors run hot, LEDs dim or flicker, chargers underperform, and breakers can trip for no obvious reason.

The widely used rule of thumb (based on a recommendation in the U.S. National Electrical Code): keep the drop on a branch circuit at or under 3%, and the total from your panel to the device at or under 5%. These are guidelines for good performance, not laws — low-voltage systems like 12 V solar are often even stricter, because 3% of 12 V hurts a lot more than 3% of 240 V.

Why don't other calculators agree with each other?

Almost always one of two things: some tools want round-trip length where others want one-way (we always use one-way and double it for you), and some use slightly different resistance values for the wire. Open "How we calculated this" above and you can check our numbers against anything.

Want to know why you should trust this result? Read how VoltDrop checks its numbers.